eutampieri

@[email protected]

This profile is from a federated server and may be incomplete. View on remote instance

eutampieri , to Photography in [OC] Ambulance

Cool! Sweden or Norway?

eutampieri , to homelab in Does Avahi work over a bridged network?

I definitely agree!

eutampieri , to homelab in Does Avahi work over a bridged network?

Exactly that. Router A


<span style="color:#323232;">ip address add 192.168.1.1/24 dev eth1
</span><span style="color:#323232;">ip address add 10.0.0.1/30 dev eth2
</span><span style="color:#323232;">ip route add 192.168.2.0/24 via 10.0.0.2
</span>

Router B


<span style="color:#323232;">ip address add 192.168.2.1/24 dev eth1
</span><span style="color:#323232;">ip address add 10.0.0.2/30 dev eth2
</span><span style="color:#323232;">ip route add 192.168.1.0/24 via 10.0.0.1
</span>

Does this make it more clear?

eutampieri , to homelab in Does Avahi work over a bridged network?

Hmmm it seems that router B there should be a bridge. However, how comfortable are you with routing in general?

eutampieri , to homelab in Does Avahi work over a bridged network?

Traceroute from device in subnet A to device in subnet B

  • Router A
  • Router B
  • Device B

Note that the only way to do that in only two hops is to have the same router handle both subnets, contrary to what I said earlier.

eutampieri , (edited ) to homelab in Does Avahi work over a bridged network?

No, not at all 🙂. I’m referring to a configuration in which the two routers are linked through another subnet (using a separate link between the two) and this link is the point to point link. You usually assign a /30 so you can have an address for each router. This way the traceroute shows three hops instead of just two. However, since you’ve already told us that this is not your setup, what I’m saying shouldn’t matter to you. If you’re curious though, let’s keep talking :)

Edit: striked mistake

eutampieri , to homelab in Does Avahi work over a bridged network?

No, with PtP I meant a point to point link on a dedicated interface just for the two routers. …slideserve.com/…/point-to-point-sub-interfaces-l…

eutampieri , to homelab in Does Avahi work over a bridged network?

This works if B has an interface that is connected to the A subnet, but not if you have a PtP between the two routers

eutampieri , to homelab in Does Avahi work over a bridged network?

Then I don’t understand your topology. However, I still think you need the reflector on both routers

eutampieri , to homelab in Does Avahi work over a bridged network?

These are routed networks, and you need avahi reflector set up to mirror between A and PtP and between B and PtP

eutampieri , to Firefox in The new CSS viewport units don’t seem to be implemented on iOS [update: confirmed]

iOS Firefox uses the same engine as Safari. Anyway, how should the test behave?

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • All magazines
    •