Hi all. I’m splitting 2 XLR line level audio signals into 3 channels each. I bought one nice device (used) online called the Whirlwind SPL1x3LL (line level). Unfortunately I can’t find another used one for a decent price. However there are plenty of mic impedance matched units, SPL1x3MIC which according to the manufacturer...
I am stripping and re-sealing a corner shower stall, and am having a hell of time removing all the old caulk. I also discovered the previous homeowners decided to just caulk over the previous caulk that was on there, so I am removing 2 or 3 layers depending on the location. It was leaking in the spots that had 3 layers so I...
I posted on here the other day about some suspicious 240v cable and followed the recommendations to replace it. I was already leaning that way but was kind of hoping to be told I was overthinking it. But you all confirmed what I thought. I ran close to 25’ of 10/2 cable from the second story to the basement. Nothing is wired...
I have been investigating the fine art of dishing out a wooden chair seat for comfort today, and made discoveries that can be readily condensed into a, imho miraculously easy formula. So here goes:...
Hi, I have an Indesit 15b1 and it won’t run a cycle. When I turn it on, I get a error code, 3 green solid, amber start light and red flashing salt light. Nothing about it in the manual, Indesit said the same thing....
I am using an old HP Pavillion 15 to make a tablet. I have all of the internal components, and am making a shell. Does anyone know what the easiest way to make a case for those parts would be?
So my roommate is a habitual cigarette smoker. He doesn’t smoke indoors (thankfully) but he does smoke about every other night outdoors. I don’t think he realizes that when he’s done smoking the smell sort of… lingers on him and his clothes. Last night after he was done he was in the kitchen for a bit cooking. I came in...
I’m trying to learn how to sharpen scissors. I’m using a draw-filing technique. I’m not sure where I’m doing right or wrong. Anyone has any input? It’s a little better than it was but it’s definitely not as sharp as it could be. Gonna try attach some pics....
Well, the dryer has been disassembled and vacuumed, the dead coil removed, the new coil swapped in, ready to reassemble as soon as the new belt arrives. I was surprised how much of the brown shmutz in the heater was just ash from the coils - it dusted off quite shiny after I replaced the coil....
I feel like I have a moral responsibility to attempt to repair anything before making it waste. So I’m trying my hand at the dryer. Sadly I didnt’ realize that the whole tub joint pops upwards so I detached the tub from the join and then found the join comes off pretty easy anyways....
I’m planning to construct a home sometime in the near future in hot, arid part of the country. Obviously, keeping the home cool is a major concern and I’ve been considering all available options....