Small animals dying in the window well of my basement
I work in a basement office. There is a below-grade egress window, with a 3-4ft ladder and a large plexiglass dome that you can push out of the way....
I work in a basement office. There is a below-grade egress window, with a 3-4ft ladder and a large plexiglass dome that you can push out of the way....
What am I missing ?...
I'm currently working on my sprinkler valve box. It sucks ass. It's dug in the ground. I'm on my knees trying to replace a Hunter valve. This is the second time I'm back here this week because replacing the diaphragm didn't fix the leak. I think I'm gonna have to replace the whole valve, but the stupid valves are in the stupid...
So it’s currently 100 degrees F in my garage today. I’m sure it will only get worse as the summer goes on. I added some of those insulated garage door panels, but I don’t think they did anything....
This is probably a dumb one, but here goes....
I live in a pretty old house in the midwest, built 1929, bought in '21, single-story, ~1300ish sqft, and with a large, spacious basement. Every time summer comes around I've had issues with the basement getting MUCH colder than the rest of the house (like >10 degrees F difference), presumably due to poorly-insulated floors and...
There are a few spots I've neglected to replace old brittle sealant (around the kitchen sink) or never sealed at all (new faucet I installed 8 months ago). Now there's black gunk accruing under and around the sealant....
We have a couple big projects that I'm not comfortable doing myself (mainly roof/foundation repair)....
Hi all. I have a 2 storey, ~1200 sq ft home in a hot climate. I have a single HVAC unit...central air and ductwork, electric AC/heat. There is no zoning to the system. The thermostat is downstairs....
I'm framing up a non-load-bearing wall that has two closet doors on it, close together (the king studs for the two openings are 13" apart). Unfortunately, they are aligned such that one of the 16" OC common studs would fall within that gap. In fact, it would only be 1/2" away from the left king stud, so not even anywhere near...
Id do it like this but two people told me other way... Not sure?
I had a heat pump installed about a year ago. It came with one free service and the installing company has been calling me almost every week to come out and do the complimentary tune up. I know that I obviously should take a free tune up, but it made me wonder. How often do I actually need this done? What are they actually...
I am very much a DIY'er and doing my own HVAC repairs have never been out of the question. Actually, I have rebuilt a couple of systems, less the pressurized parts of the system....
We have a motion activated sprinkler to deter deer from eating our tomatoes and I'm looking for a timer that will shut off the water flow during the day. The ones I've seen at the store seem to only want to water intermittently, instead of completely off/on....
So my home office is in our basement while my wife’s is in a finished attic space. We have a mini split system, but it has to be all heat or all cooling, and many days it’s cold in my office, but hot in my wife’s office....
General info:...
It's on everything, my fingernails are glued to my skin underneath, I hate everything and most of all I hate spray foam....
So I was using a wood sealer (https://www.amazon.com/dp/B01AQTX3XU) on my newly built catio. Unfortunately I didn't notice how much I had sprayed on the adjacent window....
Looking for help in solving a problem where the lower door hinge pin on my entry door keeps creeping up and causing the deadbolt to become slightly misaligned making it more difficult to lock. Reading online, I keep coming across suggestions of tightening a screw that’s supposed to lock the pin in place but my hinges don’t...
Currently installed is a recent (about 10 years) Harbor Bay 5 blade ceiling fan with 44" blade diameter....
I am currently redesigning my kitchen in a 1930’s Midwestern USA house. The kitchen has a decent floor area but the floor plan is oddly restrictive....
This is not the first time I’ve ranted about the previous owner’s wiring jobs, though I think they were on the other site (and I had a different username there)....
Hi all,...
I have recently moved to this place, and before winter I went to install trvs on the water circulated radiators in order to have some more control over the temp (there used to be manual valves)....
Our laundry room sink has this bizarre attachment to to the back of the drain line clean out. It would almost seem like it was or is supposed to be a vent. Recently it’s started to give off a foul sewer smell when our washing machine rinses....