Update: root cellar with vaulted ceiling
Hi everyone...
Hi everyone...
My girlfriend’s deck was built out of untreated pine that was never painted or sealed. I dont see anywhere that any wood is rotted or broken yet, but many boards are cupping from the humidity and temperature changes over the last 4 years. If I buy a few gallons of exterior wood sealant and brush on a few layers on top and...
I’ve got one of those big red 20-gallon parts washers. You know the one. I mostly clean bicyle parts, and most bicycle lubricants are not petroleum-based. They’re usually plant or wax-based. The idea is that a water-based degreaser, like Simple Green, should have no problem cleaning the stuff. My experience is that Simple...
Not sure if I should post this here or over in Technology, but here goes....
I’d like to build a carport. It will basically just be a shed roof extending off the front of my garage. I’ll need a beam, as thin as possible, to span 22 feet from side to side....
I am looking to building my own phone from a SBC running a linux distro with plasma mobile and that can make calls. and I have some questions:...
We finished the last piece of the cat path I posted about earlier! This one goes from the laundry room, to the stairwell, and then into the guest bedroom on the upper floor (yes, I know the carpet needs replaced in that closet). They are already using them and seem to love the new path already....
My partner and I have been talking about making some cat paths in our house since long before we owned our house. We recently got 2 new dogs, so now it is a high priority project. The first step was putting up some shelves in the hallway and making a portal from the hallway to the bedroom closet (you can see it just above the...
Hi all. I’m splitting 2 XLR line level audio signals into 3 channels each. I bought one nice device (used) online called the Whirlwind SPL1x3LL (line level). Unfortunately I can’t find another used one for a decent price. However there are plenty of mic impedance matched units, SPL1x3MIC which according to the manufacturer...
I am stripping and re-sealing a corner shower stall, and am having a hell of time removing all the old caulk. I also discovered the previous homeowners decided to just caulk over the previous caulk that was on there, so I am removing 2 or 3 layers depending on the location. It was leaking in the spots that had 3 layers so I...
I have been investigating the fine art of dishing out a wooden chair seat for comfort today, and made discoveries that can be readily condensed into a, imho miraculously easy formula. So here goes:...
Hi, I have an Indesit 15b1 and it won’t run a cycle. When I turn it on, I get a error code, 3 green solid, amber start light and red flashing salt light. Nothing about it in the manual, Indesit said the same thing....
I am using an old HP Pavillion 15 to make a tablet. I have all of the internal components, and am making a shell. Does anyone know what the easiest way to make a case for those parts would be?
So my roommate is a habitual cigarette smoker. He doesn’t smoke indoors (thankfully) but he does smoke about every other night outdoors. I don’t think he realizes that when he’s done smoking the smell sort of… lingers on him and his clothes. Last night after he was done he was in the kitchen for a bit cooking. I came in...
Hello everyone, I am pulling my home’s existing ethernet cables from the garage and into my home to install a network rack. Currently my garage does not have insulation (for a future project), so it get’s too hot during summer for my router to live there, so I want to install it in my mudroom where there is insulation. My...
cross-posted from: lemmy.dbzer0.com/post/8959162...
cross-posted from: slrpnk.net/post/4160051...
We’ve got a small log burner with a light grey stone surround....
Well, the dryer has been disassembled and vacuumed, the dead coil removed, the new coil swapped in, ready to reassemble as soon as the new belt arrives. I was surprised how much of the brown shmutz in the heater was just ash from the coils - it dusted off quite shiny after I replaced the coil....
I feel like I have a moral responsibility to attempt to repair anything before making it waste. So I’m trying my hand at the dryer. Sadly I didnt’ realize that the whole tub joint pops upwards so I detached the tub from the join and then found the join comes off pretty easy anyways....
cross-posted from: midwest.social/post/4040473...
I need to build one that can be used outdoors....
I have an unfinished basement. It would be a great place for a workshop but some hobbies don’t do well in a dusty environment. Would setting up an air purifier help? Even then I’m concerned it wouldn’t get the entire volume of air....
I’ve had this Vax upright for about 5 years. Recently it’s started to cut off when I’m using it. I feel the base - and it’s hot. Any ideas for anything that I can do to fix it?...
The whole thing disassembled...