I’m looking for security cameras that will integrate with my home server and nas. I want ones that record to my nas without some BS subscription service, and ideally run FOSS server logic I can deploy on my server. I’ve got one camera now that sorta does what I want, except the software isn’t FOSS and I’ve been unable to...
I have a host name whose dns points to my home IP. I use this for game servers for my buddies. Should I be worried about my home IP being easily accessible like this, and should I get a physical firewall appliance to protect myself?...
I run a Windows 11 VM on xcp-ng to do testing and Windows specific graphic and video work. I use an old R9 390 in passthrough mode right now but it’s running out of steam....
The majority of my homelab consists of two servers: A Proxmox hypervisor and a TrueNAS file server. The bulk of my LAN traffic is between these two servers. At the moment, both servers are on my “main” VLAN. I have separate VLANs for guests and IoT devices, but everything else lives on VLAN2....
After looking into travel routers a bit, I quickly came across Gl.iNet which seems to be a leader in the space. It seems they use OpenWRT which is great, but with some special sauce on top of it....
So with Crypto mining being less profitable and miners selling their rigs for cheap I thought how can I get my self a cheap managed network switch. I saw mining motherboards with 12 PCIe 2.0 1x slots(4gbit bandwidth) and tought hey if I plug in some cheap 10g 2port network adapters I can make my own network switch with exactly...
I was found a listing on eBay for a “Mellanox CX354A ConnectX-3 FDR Infiniband 40GbE QSFP+” card for quite cheap. By the sound of the listing title it supports both infiniband and 40GbE, is that right? I would like to try out infiniband, but I would be buying for the 40GbE. And are there good drivers for modern linux distros...
Dear all, I have some questions for what I’m about to do with my HomeLab. I recently upgraded my connection to a 1000/1000 and the ISP sent me this shit ass router (Fastweb Nexxt) which is very locked down. I want to change it....
I have seen several cards that will do up to 4 NVMe from a single x16 slot (with MB and CPU that support bifurcation), but I have only found cards that are 1 PCIe slot to 1 M.2 A+E....
I recently upgraded my homelab core switch to a Mellanox SX 6012. It’s 12 ports of 40gb/s, and each can break out to 10gb/s. This switch also idles at 30 watts which was top of my list....
As I’m in the beginning steps of sorting out my homelab, I’m starting to ask questions I haven’t asked before and come across conundrums I hadn’t considered previously. One of which is how to sort out pi-hole given that my ISP has locked down the router tighter than a tight thing....