CapeWearingAeroplane

@[email protected]

This profile is from a federated server and may be incomplete. View on remote instance

CapeWearingAeroplane ,

Not 100% comparable, but synchrotron XRD allows for real-imaging of solid state chemical reactions and can, in a sense, resolve the unit cell structure of the crystal. However, what you get from an XRD is nothing like this "photo-like" image, but a diffractogram. I think you could probably re-create an image like this from a 2D diffractogram though, but I'm not sure.

CapeWearingAeroplane ,

You're definitely correct that getting sychrotron time is hard :(

On the first part though: Yes and no. XRD will tell you about things like strain and unit cell size distribution, so in that sense, you can't resolve a single doping site. On the other hand, if you have a reaction going on, or some dopant diffusing into your sample, synchrotron XRD is powerful/fast enough that you can "film" how the crystal structure changes in real time. That "film" will be a kind of average of many sites, but can still be focused to a relatively small region (don't remember exactly how small off the top of my head, but I believe we're talking nm-scale).

Does everyone learn the same gravity in school or is it different everywhere?

So, I learned in physics class at school in the UK that the value of acceleration due to gravity is a constant called g and that it was 9.81m/s^2. I knew that this value is not a true constant as it is affected by terrain and location. However I didn’t know that it can be so significantly different as to be 9.776 m/s^2 in...

CapeWearingAeroplane , (edited )

I’m assuming they’re indicating that the mass below the apparatus increased in fall (when storage was filled) and decreased slowly through the winter, leading them to measure a changed graviational constant. A back of the napkin calculation shows that in order to change the measured gravitational constant by 1 %, by placing a point mass 1 m below the apparatus, that point mass would need to be about 15 000 tons. That’s not a huge number, and it’s not unlikely that their measuring equipment could measure the gravitational acceleration to much better precision than 1 %, I still think it sounds a bit unlikely.

Remember: If we place the point mass (or equivalently, centre of mass of the coal heap) 2 m below the apparatus instead of 1 m, we need 60 000 tons to get the same effect (because gravitational force scales as inverse distance squared). To me this sounds like a fun “wandering story”, that without being impossible definitely sounds unlikely.

For reference: The coal consumption of Luxembourg in 2016 was roughly 90 000 tons. Coal has a density of roughly 1500 kg / m3, so 15 000 tons of coal is about 10 000 m3, or a 21.5 m x 21.5 m x 21.5 m cube, or about four olympic swimming pools.

Edit: The above density calculations use the density of coal, not the (significantly lower) density of a coal heap, which contains a lot of air in-between the coal lumps. My guess on the density of a coal heap is in the range of ≈ 1000 kg / m3 (equivalent to guessing that a coal heap has a void fraction of ≈ 1 / 3.)

CapeWearingAeroplane ,

This observation further compounds the hypothesis of “fun wandering story that has been told from person to person for a long time”

  • All
  • Subscribed
  • Moderated
  • Favorites
  • random
  • All magazines