IHawkMike

@[email protected]

This profile is from a federated server and may be incomplete. View on remote instance

IHawkMike ,

Hyper-V is decent. It's VMM that is atrocious. Hopefully you don't have Citrix with MCS catalogs.

I had to migrate from Samba AD to Windows Server AD and I'm sad (RIP Samba)

Samba is amazing, Windows server is a lot less so. The problem with Windows server is that it takes tons of steps to do basic things. On Samba I had Samba tool and it was very nice and friendly. On Windows server you have a ton of different management panels....

IHawkMike ,

You connect directly to the ESXi host with root. Because you're going to have to boot up vCenter in addition to the DC anyway when you're using SSO. I would use DRS rules to prefer host1 for vCenter and the PDCe for that reason.

Only in the very early days of virtualization (2008-2012) did I recommend keeping a physical server around. I know a lot more now than I did then.

But anymore, I don't recommend using SSO for hypervisors or backup infrastructure. It's better to add another wall in front of an attacker trying to laterally move onto these critical platforms for ransom, data exfiltration, etc.

And in reality, these "kaboom events" aren't terribly common unless you've neglected some other part of your infrastructure.

IHawkMike ,

I almost certainly won’t be alive for it, but it’s funny to think about how confused people are going to be when 2100 isn’t a leap year.

Tailscale as a tool for PCI compliance (to avoid port forwarding)

So I recently discovered that the camera NVRs are majority insecure. This lead to my company failing to get PCI compliance which wasn’t all that unexpected. However, this leads to the awkward situation of me comparing mesh VPNs. I’ve been playing around with netbird but I’m looking for a more polished solution....

IHawkMike ,

Which specific PCI requirements did you fail?

Regardless, it sounds like you’re over-complicating things. The cameras should just be on a separate VLAN with proper ACLs at the router/firewall.

IHawkMike ,

Check the following during this unknown network window:

  • What does ipconfig /all show
  • Can you ping the gateway?
  • What does arp -a show?
  • Is there anything in the NCSI log?

Also are your wireless clients on a different VLAN than your wired clients? Does the firewall treat this traffic differently in any way? Does DHCP give out different DNS settings than wired?

IHawkMike ,

The private financial company—which you don’t get to choose—gets its cut as well, in fees, some which are hidden.

Not disagreeing with anything, but people should know that even if you’re locked into a crappy HSA provider through your employer, like BenefitWallet, you can and should still open an HSA with a good provider, like Fidelity, and max out and invest contributions there.

Just don’t forget to save all the receipts for out-of-pocket health expenses.

IHawkMike ,

It sounds like you need to set up Exchange Hybrid although it’s really not clear to me what you’re actually doing.

What is the “secondary server?” How did all this work before you bought “MS accounts?” Where was the MX pointing before? When you say “Exchange server” are you talking about Exchange Online or onprem? Which server is rejecting with the relay error?

Regardless, you’re going to need objects in the environment where the MX points that forward to the second location where the rest of the users are. In Exchange onprem/Online this would ideally be a MailUser object created by Azure AD Connect, but a Contact could suffice in certain setups.

And the second environment needs to trust the emails forwarding through the first or you’ll have SPF failures.

But again, a proper Exchange Hybrid setup takes care of all of this.

IHawkMike ,

Does this help?

techcommunity.microsoft.com/t5/…/607619

You should still be able to sync them and let soft matching connect the onprem and cloud accounts. Then the info in that post can be used to clean up the duplicate cloud mailbox and its properties in preparation for a Migration.

IHawkMike ,

This is one of the only remaining use cases (in my opinion) for Public Folders.

I hate public folders.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • random
  • All magazines